Carol Ann Shafer

Hi Carol,

Here are the directions that I handed out at my class for my Occasions mini box and cards. Hope these help! - Diana

Supplies
Stamps:
W: 129621, C: 129624 Patterned Occasions
Paper:
122923 Island Indigo 122924 Pool Party 115316 Rich Razzleberry 126839 Summer Starfruit 111349 Tangerine Tango 100730 Whisper White 127540 Sycamore Street DSP
Ink:
126986 Island Indigo 126982 Pool Party 126950 Rich Razzleberry 126991 Summer Starfruit 126946 Tangerine Tango
Tools & Accessories:
130812 (1) Sycamore Street Button 124262 10” of Whisper White Baker’s Twine 122941 (2) Mini Brads 104294 Sticky Strip 104430 (3) Stampin’ Dimensionals 103683 (2) Glue Dots 113439 Big Shot 129383 Needlepoint Border Embossing Folder 113462 Scallop Envelope Bigz Die 115954 Two Tags Bigz Die 118074 Owl Builder Punch 119850 1-3/4” Circle Punch 120907 Decorative Label Punch 101227 1/16” Circle Handheld Punch 103579 Paper Snips

Directions:

Box —
a. Use the Big Shot and the Two Tags die (wider tag) to die cut two Pool Party tags and one Designer Series Paper (DSP) tag. Fold along score lines on all three tags. Apply Snail adhesive to back of DSP tag being sure to avoid putting the adhesive in the center of the tag (above and below the slit). Adhere DSP to one of the Pool Party tags. Apply Sticky Strip to lower portion of back side of both tags. (See sample at table.) Set aside for now.
b. Score the 2-7/8” x 6-3/4” Pool party card stock on the shorter side at 1/2” and 2-3/8”. Next score the longer side at 2” and 4-3/4”.
c. Use your paper snips to cut the box according to the template at your table. Fold along all score lines and crease folds with a bone folder. Apply Sticky Strip to the box following the template at your table. Remove Sticky Strip red backing from center section of box and assemble box base.
d. Remove Sticky Strip red backing from back of the Pool Party tag. Adhere to bottom of box base taking care to line up the fold line on the tag with the bottom edge of the box base. Remove Sticky Strip red backing from the side of the box base and adhere to Pool Party tag to complete one side of box. Repeat with DSP tag on opposite side of box.
e. Slide one end of 5/8” x 7-1/2” Pool Party card stock into slit on tag on box base to form handle. Using the 1/16” Circle Punch, punch hole through handle using the hole in the tag as a guide. Insert a Mini Brad into hole and secure brad. Repeat on other side of box to complete handle.
Adhere 1/2” x 2-3/4” Island Indigo card stock on lower part of DSP on front of box.
g. Use the Decorative Label Punch to punch 2” x 2-1/2” Tangerine Tango card stock. Use the Owl Punch to punch one heart from a scrap of Summer Starfruit card stock.
h. Stamp coffee mug image using Pool Party Ink on 2” x 2” Whisper White card stock. Punch out image using the 1-3/4” Circle Punch. Adhere Summer Starfruit heart to center of heart on stamped image.
i. Adhere stamped image to Tangerine Tango decorative label. Place Dimensionals on the back of the label, and then attach it to the front of the box.
j. Thread Baker’s Twine through button and tie in bow. Add Glue Dot to the back of the button and attach over Mini Brad on front of box.

Mini Cards —
a. Score all 2-1/8” x 6” Whisper White card stock pieces at 3” along the 6” side to form the card bases.
b. Adhere 3/8” x 2-1/8” DSP pieces to bottom edges of card bases.
c. Use the Big Shot and the Needlepoint Embossing Folder to emboss the cards just above the DSP pieces.
d. Stamp images from the Patterned Occasions stamp set on the cards using various ink colors (Island Indigo, Pool Party, Rich Razzleberry, Summer Starfruit, and Tangerine Tango). Place cards inside of the box.

Comments

Chris Smith April 29, 2014 at 12:12pm

Here is the original post for the card you mentioned:
http://inkpad.typepad.com/from_my_ink_pad_to_yours/2013/06/im-back-...

Chris
Diana Raney November 25, 2013 at 3:37am

Hi Carol,

Here are the directions that I handed out at my class for my Occasions mini box and cards. Hope these help! - Diana

Supplies
Stamps:
W: 129621, C: 129624 Patterned Occasions
Paper:
122923 Island Indigo 122924 Pool Party 115316 Rich Razzleberry 126839 Summer Starfruit 111349 Tangerine Tango 100730 Whisper White 127540 Sycamore Street DSP
Ink:
126986 Island Indigo 126982 Pool Party 126950 Rich Razzleberry 126991 Summer Starfruit 126946 Tangerine Tango
Tools & Accessories:
130812 (1) Sycamore Street Button 124262 10” of Whisper White Baker’s Twine 122941 (2) Mini Brads 104294 Sticky Strip 104430 (3) Stampin’ Dimensionals 103683 (2) Glue Dots 113439 Big Shot 129383 Needlepoint Border Embossing Folder 113462 Scallop Envelope Bigz Die 115954 Two Tags Bigz Die 118074 Owl Builder Punch 119850 1-3/4” Circle Punch 120907 Decorative Label Punch 101227 1/16” Circle Handheld Punch 103579 Paper Snips

Directions:

Box —
a. Use the Big Shot and the Two Tags die (wider tag) to die cut two Pool Party tags and one Designer Series Paper (DSP) tag. Fold along score lines on all three tags. Apply Snail adhesive to back of DSP tag being sure to avoid putting the adhesive in the center of the tag (above and below the slit). Adhere DSP to one of the Pool Party tags. Apply Sticky Strip to lower portion of back side of both tags. (See sample at table.) Set aside for now.
b. Score the 2-7/8” x 6-3/4” Pool party card stock on the shorter side at 1/2” and 2-3/8”. Next score the longer side at 2” and 4-3/4”.
c. Use your paper snips to cut the box according to the template at your table. Fold along all score lines and crease folds with a bone folder. Apply Sticky Strip to the box following the template at your table. Remove Sticky Strip red backing from center section of box and assemble box base.
d. Remove Sticky Strip red backing from back of the Pool Party tag. Adhere to bottom of box base taking care to line up the fold line on the tag with the bottom edge of the box base. Remove Sticky Strip red backing from the side of the box base and adhere to Pool Party tag to complete one side of box. Repeat with DSP tag on opposite side of box.
e. Slide one end of 5/8” x 7-1/2” Pool Party card stock into slit on tag on box base to form handle. Using the 1/16” Circle Punch, punch hole through handle using the hole in the tag as a guide. Insert a Mini Brad into hole and secure brad. Repeat on other side of box to complete handle.
Adhere 1/2” x 2-3/4” Island Indigo card stock on lower part of DSP on front of box.
g. Use the Decorative Label Punch to punch 2” x 2-1/2” Tangerine Tango card stock. Use the Owl Punch to punch one heart from a scrap of Summer Starfruit card stock.
h. Stamp coffee mug image using Pool Party Ink on 2” x 2” Whisper White card stock. Punch out image using the 1-3/4” Circle Punch. Adhere Summer Starfruit heart to center of heart on stamped image.
i. Adhere stamped image to Tangerine Tango decorative label. Place Dimensionals on the back of the label, and then attach it to the front of the box.
j. Thread Baker’s Twine through button and tie in bow. Add Glue Dot to the back of the button and attach over Mini Brad on front of box.

Mini Cards —
a. Score all 2-1/8” x 6” Whisper White card stock pieces at 3” along the 6” side to form the card bases.
b. Adhere 3/8” x 2-1/8” DSP pieces to bottom edges of card bases.
c. Use the Big Shot and the Needlepoint Embossing Folder to emboss the cards just above the DSP pieces.
d. Stamp images from the Patterned Occasions stamp set on the cards using various ink colors (Island Indigo, Pool Party, Rich Razzleberry, Summer Starfruit, and Tangerine Tango). Place cards inside of the box.
Brenda Hofstatter September 24, 2013 at 9:19am

Hi Carol. On my card for DD #69, I only used dimensionals on the flowers to prop them up. The leaves I actually stuck to the crumb cake band with Tombow. Hope that helps.
Rita Wright (US-Texas) July 24, 2013 at 2:40pm

I'm not sure if you are the same Carol who asked for directions for the box on my blog, but the Google thing is confusing now and I thought I'd check here and see if you might be a demo. Hopefully you are the same person or else you're going to think I'm a nut. lol

Anyway, I just used the tutorial from Splitcoast that you can find here: http://www.splitcoaststampers.com/resources/tutorials/2_5_7_10_box/
Shoni Matney March 25, 2013 at 4:05am

Hi there, got the template for the tea cups up. Enjoy, s.
DeAnn Rauzi February 17, 2013 at 1:21pm

Carol Ann -

I would be happy to share the directions for the Tea for Two tote bag. If you would like them just email me at ddrauzi@q.com and I will send you a pdf picture tutorial I made.

-DeAnn
Mary Haugen May 24, 2012 at 10:39am

Carol,

For my card in the Stampin' Success, I just wrapped the bakers twine around the card three times then tied it off in a bow. Hope this helps you.

Mary
Sharon White February 11, 2012 at 1:26pm

http://www.sharonsscrappyspace.com/2012/02/elmo-punch-art-card.html

Here is a link for Elmo tutorial. Thank you for your interest and your kind words!

Sharon White
Lauri Ingram February 3, 2012 at 7:59am

Thanks! The card is 6" by 3"!
Cheryl Garratt December 18, 2011 at 2:20pm

Hi Carol Ann,

If you still want instructions for my Village of Frostiness, there is a free tutorial on my blog. www.cherylcanstamp.blogspot.com

Cheryl

of 4

This reply was deleted.

Carol Ann Shafer

About

Comment Wall

Comments

Friends (113)

Photos